Wot u will need:

Rig Body 50lb

Snood Line 20lb

1 x SRT Spring

2 x Crimps

1 X Mini Swivel

1 x Large Swivel

1 x 3/0 Sakuma Manta Hook

1 x Sakuma Bait Hook

2 x Mini Beads

1 x Breakaway IMP



then about 3 to 4 foot of rig body (50lb),tie the IMP on the end



then slide a crimp onto the rig body,along with the SRT spring,followed by a mini bead,then a mini swivel,on top of the mini swivel add another mini bead then add the last crimp on top,then add the large swivel on top of the line,make sure you press the crimps onto the line using pliers



now for the snood(20lb),cut the same length as wot u did for the rig body or a bit shorter,tie the 3/0 hook on on end,next slide the mini hook down the line,about an inch or two from the big hook at the bottom twist the mini hook around the line


hook attached to IMP

i place the hook in the IMP and get the loose end of the snood an put it in the mini swivel,i tighten it so its in tension then tie the loose end onto the mini swivel,so now it should be in tension wen u hold it up,the SRT spring acts with the IMP givin it a better impact as soon sas the rig hits the water



tight lines kiddaz